SiC MOSFETs CM120R016LX100
CM120R016LX100 · SiC MOSFETs.
- Package
- TO-247-3L
- VDS
- 1200
- ID(A)
- 115
- RDS(on)(mΩ)
- 16
- VGSop
- 18
- VGS(th)
- 2~4
Request a quote
Part: CM120R016LX100We will follow up by email after submission.
Product Introduction
CM120R016LX100 · SiC MOSFETs.
Verified key specifications include VDS 1200, Package TO-247-3L, ID(A) 115, RDS(on)(mΩ) 16.
Verified typical applications include Data Center, Telecom, Server, Home Appliances, Industrial Power.
A verified datasheet for this model is available on this page for full technical data.
Provide the operating conditions or sample needs here for further selection and application support.
Specifications
| Package | TO-247-3L |
|---|---|
| VDS | 1200 |
| ID(A) | 115 |
| RDS(on)(mΩ) | 16 |
| VGSop | 18 |
| VGS(th) | 2~4 |
| Qg(nC) | 238 |
| Tjmax(℃) | 175 |
Datasheet
- Energy storage PCS efficiency is stuck at 98% and cannot go higher—how much change can SiC SBDs bring?
- Servo Drive Overheating Persists? Before Replacing the Heatsink, Check the Diode in the Freewheeling Loop
- Single-Phase String PV Inverters: Achieving Both No-Derating at High Temperature and High Low-Light Efficiency
- HGF200MA120X100 IGBT Module: An Efficiency Solution for Industrial Drives and High-Frequency Power Supplies
- Why do PV combiner boxes need dedicated anti-reverse Schottky modules?
- IGBT Paralleling: Why “Each Unit Meets Spec” Does Not Mean “the Pair Is Consistent”
- Power Supply Design for 5G Base Stations and Edge Data Centers: Why Is Saving Space More Valuable Than Saving Electricity Costs?
- Why must telecom power supply modularization resolve the conflict between "thermal" and "frequency"?
- SiC MOSFET Selection for AC/DC Front-End PFC in 800V HVDC Architectures: Why “Sufficient Voltage Rating” Is Only the Entry Ticket
- Why a PIM is more worth evaluating than “six discrete SiC” for inverter air-conditioner compressor drives?
- 5G Base Station Energy Consumption Dilemma Persists? SiC MOSFET Helps Telecom Power Supplies Break the 98% Efficiency Ceiling
- Given that BMS balancers inherently operate in high-temperature environments, how much of SiC’s high-temperature advantage can actually be realized?
- For Active BMS Balancing, Is the Efficiency Bottleneck in the Topology or in the Switching Devices?
- Home appliance PFC switching frequencies are usually not high, so the high-frequency advantages of SiC MOSFETs cannot be leveraged—is it still necessary?
- Why must 5G base station power supplies transition from silicon to SiC?
Selection guides
Frequently asked questions
- With long lead times on imported SiC devices, what domestic SiC products can replace them?
-
Hypersemi has a complete SiC line — SiC MOSFETs, SiC diodes and SiC modules — benchmarked to international brands, directly replacing imported devices in new-en…
Read the full answer - What domestic alternatives exist for 650V SiC MOSFETs?
-
Hypersemi CM65R380TFX100 and CM65R540TFX100 are recommended, 650V with RDS(on) down to 380mΩ in TO-220F, offering pin-to-pin replacement of imported equivalents…
Read the full answer - Which domestic SiC MOSFETs can replace imported brands?
-
Hypersemi offers 650V and other SiC MOSFETs. Domestic replacement must compare more than voltage and RDS(on) — also gate charge, switching loss, parasitics, sho…
Read the full answer - What are the advantages of SiC MOSFETs in PV inverters?
-
PV inverters must balance efficiency, power density and thermal management. SiC MOSFETs suit high-frequency power conversion and reduce switching loss, providin…
Read the full answer - Does Hypersemi offer 650V SiC MOSFET products?
-
Yes. Hypersemi offers 650V SiC MOSFETs such as CM65R540TFX100 and CM65R380TFX100 in TO-220F packages, selectable by on-resistance, rated current and system oper…
Read the full answer