TECH FORUM
Add the other filter to see articles crossing "SiC MOSFETs" with it.
-
Power Supply Design for 5G Base Stations and Edge Data Centers: Why Is Saving Space More Valuable Than Saving Electricity Costs?
In application scenarios such as rooftop cabinets, street-side cabinets, and building-top sites, physical space is the scarcest operational resource.…
-
Why must telecom power supply modularization resolve the conflict between "thermal" and "frequency"?
Modular telecom power supplies require a single module to deliver 3 kW–5 kW within a 1U/2U height.…
-
SiC MOSFET Selection for AC/DC Front-End PFC in 800V HVDC Architectures: Why “Sufficient Voltage Rating” Is Only the Entry Ticket
In the AC/DC front-end totem-pole PFC stage of an 800V HVDC data center architecture, the SiC MOSFET selection bottleneck is not “whether the voltage rating is …
-
Why a PIM is more worth evaluating than “six discrete SiC” for inverter air-conditioner compressor drives?
Because the bottleneck of discrete solutions is not the chip but the commutation loop among the six devices on the PCB.…
-
5G Base Station Energy Consumption Dilemma Persists? SiC MOSFET Helps Telecom Power Supplies Break the 98% Efficiency Ceiling
Why Must Modular Telecom Power Supplies Resolve the “Thermal” and “Frequency” Contradiction?The core contradiction in modular telecom power supplies lies in the…
-
Given that BMS balancers inherently operate in high-temperature environments, how much of SiC’s high-temperature advantage can actually be realized?
Under the same temperature-rise constraint, SiC allows a larger balancing current to be retained, or a smaller thermal-design margin to be traded for.…
-
For Active BMS Balancing, Is the Efficiency Bottleneck in the Topology or in the Switching Devices?
In most engineering practice, switching devices are the more direct constraint. The reverse-recovery charge of the silicon MOSFET body diode creates a fixed “lo…
-
Home appliance PFC switching frequencies are usually not high, so the high-frequency advantages of SiC MOSFETs cannot be leveraged—is it still necessary?
The answer is Yes—and the necessity has already been validated by mass-production data. What SiC MOSFETs reduce at low switching frequencies is not a “frequency…
-
Why must 5G base station power supplies transition from silicon to SiC?
5G Base Station Totem-Pole PFC: Key Selection Points for the CM65R065LX100 High-Frequency Bridge ArmThe “equipment rooms becoming cabinets, cabinets becoming po…