TECH FORUM
-
Which MOSFETs suit battery management systems (BMS)?
MOSFETs in a BMS handle charge/discharge control, over-current protection and switching, selected by cell count, operating voltage, continuous/peak current, RDS…
-
How to choose MOSFETs for 18V, 24V and 36V power tools?
For power tools, focus on battery voltage, peak current, RDS(on), switching speed, package thermal resistance and cooling.…
-
How to choose the right IGBT module for industrial drive applications?
For industrial drives, consider DC-link voltage, rated current, switching frequency, short-circuit capability, power level and cooling.…
-
Which IGBTs are recommended for PV and energy-storage inverters?
PV/energy-storage inverters require IGBTs selected by voltage, current, conduction and switching loss, operating temperature and cooling.…
-
For high-efficiency power conversion, should I choose IGBT or SiC MOSFET?
If switching frequency, efficiency and power density matter most, evaluate SiC MOSFET; if the system operates at conventional IGBT power and frequency levels wi…
-
What parameters matter when selecting power modules for industrial drives?
For industrial drives, focus on rated voltage, rated current, topology, switching frequency, conduction loss, switching loss, thermal resistance and cooling.…
-
What is the difference between SiC MOSFET and IGBT, and how does Hypersemi recommend choosing?
SiC MOSFETs suit high switching frequency, high efficiency and low switching loss; IGBTs suit medium-to-high power, cost-sensitive and conventional industrial d…
-
Are the system-level advantages of silicon carbide MOSFETs in high-voltage circuits just because of their fast switching speed?
HyperSemi 1700V & 3300V SiC MOSFETs, low-loss high-speed switching devices for 1500V DC bus photovoltaic, energy storage, motor drive and high-voltage DC/DC app…
-
How much electricity is actually lost in a year when an energy storage system’s round-trip efficiency differs by 1%?
Each 1-percentage-point gain in round-trip efficiency lets a 100MWh storage station release about several million kWh more electricity per year.…
-
Why Do VFD Braking Units Repeatedly Burn Power Devices: Is the Problem the IGBT or the Freewheeling Diode?
In most cases, the problem is not the IGBT but the reverse-recovery behavior of the freewheeling diode in the braking chopper circuit.…
-
Wind Converter IGBT Module Selection Guide: Four Hard Criteria and Three Common Pitfalls
Wind converter selection is not about best efficiency but about surviving a 20-year service life.…
-
The Second Threshold in 1500V Photovoltaic Boost Selection
1. 1700V Is an Entry Ticket, Not a Safety CertificateThe DC bus of a 1500V system peaks at approximately 1450V. Following the common ×1.3–1.…