Why EV Charging Stations Need Dedicated Schottky Modules?
The primary cause of charging module failures is often not damage to the chip itself, but heat dissipation. Industry after-sales data show that heat-related failures tend to cluster after charging modules have been in service for two years; for modules without potting protection, failure rates begin to rise after three months of operation, and various problems become fully apparent after one year. In EV charging pile systems, Schottky modules mainly perform three functions: DC-DC secondary rectification, auxiliary power supply freewheeling, and output reverse-polarity protection. Among these, the continuous conduction loss from DC-DC secondary rectification directly determines the internal temperature rise of the charging module. Discrete Schottky devices rely on PCB copper foil for heat dissipation, and inside the sealed power compartment of a charging pile, the thermal resistance conduction path is too long. Modular packaging integrates multiple chips onto a metal baseplate, greatly shortening the heat conduction path, and is an effective engineering solution for controlling device junction temperature.
Three Locations for Schottky Modules in EV Charging Piles and the Selection Logic
- Location 1: DC-DC converter secondary rectification.
In the LLC or full-bridge DC-DC conversion circuit of a charging module, the Schottky module is placed on the transformer secondary side to perform high-frequency rectification and convert the transformer's AC output into DC. This location operates at high frequency, and the current waveform is discontinuous. The short reverse recovery time of Schottky diodes makes them better suited to this operating condition than ordinary silicon fast-recovery diodes. The core of selection is to calculate conduction loss based on VF × actual average current × conduction duty cycle, while evaluating module thermal resistance to ensure that device junction temperature remains within the design margin. The Hypersemi HS11UDA400N1X100 (M45 package, 400 A / 100 V, VFM 0.95 V, IFSM 3300 A, Non-isolation SBD) provides 400 A current capability in the 100 V voltage class and is suitable for multi-chip parallel rectification schemes on the secondary side of high-power DC-DC converters. If the single-module power rating of the overall system is higher, the product category page also offers devices rated 100 V / 800 A / 6400 A surge, VFM 0.95 V, using a larger chip area to spread single-chip current density and reduce the thermal cycling stress on the device.
- Location 2: Auxiliary power supply and gate-drive supply freewheeling.
The internal control mainboard, gate-drive circuits, and isolated sampling power supplies in a charging pile generally draw power from the DC bus and are supplied after stepping down through a low-power DC-DC converter. The freewheeling diode here operates at a low current but at a very high switching frequency. The impact of forward voltage drop VF on overall efficiency is partially offset by switching losses, making device reliability and packaging consistency the focus of selection. The Hypersemi HS8MBRH200N2X100 (M31H package, 200 A / 200 V, VFM 1 V, IFSM 1650 A, Non-isolation SBD) provides a module-level short heat-flow path in the 200 V/200 A class and is suitable for auxiliary power supply rectification and freewheeling applications.
- Location 3: Output reverse-polarity protection.
When the positive and negative terminals of the charging gun are connected incorrectly, the reverse-blocking diode must quickly cut off the reverse current at the instant the reverse voltage is established. With its high-speed switching characteristics, Schottky can complete the protection action at the nanosecond level. There are two key points in selecting devices for this location: the reverse withstand voltage must cover the maximum system operating voltage, and the forward current capability must match the rated output current of the charging pile. Devices in the 200 V class can provide sufficient voltage margin for low-voltage auxiliary circuits and signal circuits. For reverse-polarity protection on the main power output of a charging pile, parameters must be rechecked against the actual system voltage.
A Boundary That Must Be Observed: 200 V Si SBDs Must Not Enter High-Voltage Main Power Paths
The AC/DC PFC rectification stage and the high-voltage DC-DC primary side of a charging pile typically operate at an 800 V bus voltage, and rectification devices need a 1200 V voltage rating. Silicon-based Schottky modules have a maximum reverse withstand voltage of only 200 V and must not be used in PFC main rectification circuits or high-voltage DC-DC primary-side freewheeling circuits. The reasonable application range of Schottky modules in charging pile systems is concentrated on the low-voltage side, including DC-DC secondary rectification, auxiliary power supply, output reverse-polarity protection, and various signal circuits. Once this voltage boundary is exceeded, SiC Schottky diodes or high-voltage fast-recovery diodes should be selected. The first step in engineering selection should not be to directly compare forward voltage drop VF, but to first calculate the reverse peak voltage at each application location and then determine whether 200 V-class silicon Schottky modules can be included in the selection list.